[vc_row][vc_column][vc_column_text]
The ELM Microgrid Package is assembled to the highest standards in
a UL 508A shop. It is shipped as a self-contained unit and can be
installed outdoors or indoors.
[/vc_column_text][vc_single_image image=”1279″ img_size=”full” alignment=”center”][/vc_column][/vc_row][vc_row][vc_column][vc_custom_heading text=”MICROGRID 100 PACKAGE” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column width=”1/4″][vc_column_text]
Turnkey Solution
- Factory Assembled
- Pre-Engineered
- Pre-Wired
- Pre-Installed Safety
- Labels
- Pre-Tested
[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]
Managed Assets
- Solar Generation
- Distributed Battery
- Storage
- Diesel, Propane & Nat Gas Generators
- CHP Systems
- Grid Power
[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]
Communications & Control
- 4G LTE Cellular
- Ethernet and Wifi
- Building Management
- Generator Start and Stop
- Optimal Power Forecasting
- Power Reliability Alerts
- Isochronous Generation Control
[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_column_text]
The Switch Advantage
- Assembled in UL
- 508A Shop
- Turnkey Solution
- Indoor and Outdoor
- Enclosure Options
- Includes Climate Control
- and Fire Suppression
- Includes Microgrid
- Installation and
- O&M Guides
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”1/3″][vc_custom_heading text=”Microgrid 100″ font_container=”tag:h2|text_align:center|color:%230f65b0″ use_theme_fonts=”yes”][/vc_column][vc_column width=”2/3″][vc_custom_heading text=”TECHNICAL SPECIFICATIONS” font_container=”tag:h2|text_align:center” use_theme_fonts=”yes”][/vc_column][/vc_row][vc_row][vc_column width=”1/2″][vc_column_text css=”.vc_custom_1622466129140{margin-bottom: 8px !important;}”]
| Electrical Specifications |
[/vc_column_text][vc_column_text]
| Single Phase Operation | |
| AC Voltage | 240 VAC |
| AC Input/Output Current | 400 A |
| AC Output Power (discharge) | 100kW |
| AC Input Power (charge) | 100kW |
| Battery Capacity Range | 205 kWh |
| AC Frequency (field settable) | 50/60 Hz |
| Max AC Overcurrent Protection | 375 A |
| Peak Efficiency | 97.00% |
| AC Connection | Split Phase 3 Wire L1, L2, N |
| Three Phase Operation | |
| AC Voltage | 480 VAC |
| AC Input/Output Current | 250A |
| AC Output Power (discharge) | 200kW |
| AC Input Power (charge) | 200kW |
| Battery Capacity Range | 205 kWh |
| AC Frequency (field settable) | 50/60 Hz |
| Max AC Overcurrent Protection | 250 A |
| Peak Efficiency | 97.00% |
| AC Connection | 3 Phase, 4 Wire |
| Equipment Specifications | |
| External Dimensions (L x W x H) | 84″ x 60″ x 81″ |
| Weight | 7500 lbs. |
| Lifting Provisions | Fork Lift Slots |
| Paint Tested | 1000 Salt Hour Spray |
| Fire Suppression | Hybrid – 3M Novec 1230 Dry Pipe Water |
| Handles | Reversable/ Lockable |
| Temperature Range | -20°C to 50°C |
[/vc_column_text][/vc_column][vc_column width=”1/2″][vc_column_text]
| Control Software |
| ELM Autonomous Microgrid Site Control System |
| Access & Alerts on Desktop & Mobile 24/7 |
| Asset Monitoring System Level & Individual |
| Individual Microgrid Component Pages |
| Local HMI IP 65 Touchscreen |
| Communications: WiFi, Ethernet, Cellular |
[/vc_column_text][vc_column_text]
| Operation Parameters | |
| Islanded MicroGrid | Off Grid Applications |
| Grid Tied MicroGrid | Peak Shaving Back Up Power Demand Response |
| Distributed Generation | Time of Use Operation |
| Key System Components |
| NEMA 4 Enclosure |
| Bi Directional Storage Inverter |
| DC Disconnect – (Battery) |
| AC Disconnect (Inverter) |
| AC Disconnect (Utility Interconnect) |
| AC Circuit Breaker (Load Panel) |
| PV Disconnect |
| Transformer |
| Climate Controls |
[/vc_column_text][vc_column_text]
| Certifications | |
| Batteries | UL 1973 |
| Inverter | UL 1741 SA |
| System | UL 9540 (In Process) |
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]
ELM’s Microgrid 100/250 can be configured for single or 3-phase operation via firmware updates to the inverter. Both single phase and 3-phase operation do require an external step down transformer which is included in the system package. For higher power or storage requirements multiple systems can be paralleled and additional energy storage containers can be added. Please contact ELM for more details.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_single_image image=”14″ img_size=”full” alignment=”center”][vc_column_text]
2933 Eisenhower, Suite 120 | Carrollton, TX 75007
p 214.533.8712 | w www.elmllc.com | e sales@elmllc.com
[/vc_column_text][/vc_column][/vc_row]